POLARIS RANGER RZR900 XP 2012 WINCH MOUNT

Mount designed to work with the following winches:

• KFI: ST17/A2000/A2500-R2/A3000/U45-R2/SE25/SE35/SE45-R2/AS-50
• KFI: AM-25/AM-35/AS-25/AS-35
• WARN: VRX 25/VRX 25-S/VRX 35/VRX 35-S
• WARN: A2000/A2500/U2500/1.5ci/2.5ci/2.5ce/3.0ci/3.0ce/3.0s
• WARN: RT15/RT25/RT30/XT15/XT25/XT30
• WARN: Vantage 2000-3000 lb/Provantage 2500-3500 lb
• RAMSEY: ATV2500/ATV3000
• SUPERWINCH: Terra25/Terra35/A3500/LT2500/LT3000/LT4000ATV
• MILE MARKER: PE2.5/PE 3.5/VMX2.5/PE3500
• CYCLE COUNTRY: Work Power 2500/Powermax 2500 and 3500
• BADLAND: 2-Hole Winches 
  • Will require the additional purchase of the Converter Mount # 100480
• BADLAND: Standard Winches 
• CHAMPION: 2-Hole Winches 
  • Will require the additional purchase of the Converter Mount # 100480
• CHAMPION: Standard Winches 
• KEEPER CORP. TRAKKER: KT2500/KT3000/KT2500C/KT3000C
• KEEPER CORP. TRAKKER: KT2000
  • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
  • Will require the additional purchase of the Converter Mount # 100480
• SMITTYBILT: XRC 2.0
  • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
  • Will require the additional purchase of the Converter Mount # 100480
• SMITTYBILT: XRC 3.0/XRC 4.0
• XGEAR: X3000/X4000
  • 4-Hole Standard (3.00" x 4.875" bolt pattern)
• VENOM: 2000/2500/3000/3500 (Hardcore Series)
  • All with 3.00" x 4.875" bolt pattern mount-up.
• VENOM: 4500/5000 (Hardcore Series) Will require the additional #101065 Spacer Plate
  • All with 3.00" x 4.875" bolt pattern mount-up.
• QUADBOSS: RP25/RP35
• Possibly many others with the standard mounting patterns below, call to confirm.
  • 4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
• 2-HOLE MOUNTED WINCHES WITH A 3.10" BOLT PATTERN:
  • All 2-Hole mounted winches will require the additional purchase of the Converter Mount # 100480
  • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
• This mount has the Wide Bolt Pattern built in but is not recommended due to cable rub on the mount.
  • 4-Hole (3.00" x 6.60" bolt pattern with rollers that are 6.00" bolt pattern)

Specifications:

• 100% MADE IN THE USA.
• Constructed of 3/16" steel.
• Unlike all other mount competitors, our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
• Powder coated black for supreme durability.
• Complete installation instructions included.
• All mounting hardware included.
• Satisfaction guaranteed.
• Roller fairlead and winch not included.