smart battery lead that measures voltage; monitors charge of a stored 12V Lithium (LMiFePO4) battery and confirms if the vehicle charging system is working correctly.

LENGTH: 24″ / 60cm (x20)

BATTERY CONNECTOR: 1/4″ (M6) / 5/16” (M8) ringlets

CHARGE CONNECTOR: 2-pin SAE, protected from dirt and liquid with rubber sealing cap and shroud.

OPERATION: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode).

• Vehicle storage: 3 LEDs display ‘full to empty’ voltage range for 12.8V/13.2V Lithium batteries (LFP/LiFePO4/Lithium nano Phosphate); 4th LED warns when vehicle system or connected battery charger is OVERCHARGING! (long term draw less than 0.2mA).
• Vehicle running: LED arrow mode activates when charge voltage reaches an effective lithium charge range of 14.2V – 14.5V (√green LED). OVERCHARGE warning activates at \14.6V.

CABLE RATING: 16 AWG (1.31mm2) SPT-2W

FUSE: 15 Amp

USE: -40°C/-40°F very low temperature, remains flexible at ‘below freezing’ temperatures

STYLE: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud