Brand new stator assembly 200 watts- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All product shipped are tested
20% MORE OUTPUT OVER STOCK, WORK WITH ALL OTHER OEM COMPONENTS. *All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions :
Interior diameter: 53 mm
Exterior diameter: 115 mm
Thickness: 14 mm
Length of wires stator to grommet: 90 mm
Length of wires grommet to plug: 560 mm
Length of pickup coil\'s wire to grommet: 250 mm
Other specifications :
Number of wires: 6
Number of plugs: 2
Number of terminals: 6
Alternator: Green to White = 0.4 ohms \/-20%
Pick up: Blue/Yellow to Green/Red = 230 ohms \/-20%
Source: Black/Red to Brown = 90 ohms \/-20% Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |
