Brand new aftermarket stator- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues. All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions :
Interior diameter : 53 mm
Exterior diameter : 114 mm
Thickness : 13 mm
Length of wires stator to grommet : 110 mm
Length of wires grommet to plug : 150 mm
Length of pickup coil\'s wire to grommet : 210 mm
Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7
Wire to wire resistance :
Alternator : White between each White = 0.2 ohms \/-20%
Pickup : Red to White = 575 ohms \/-20%
Source : Green to Brown = 320 ohms \/-20% Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |
