Brand new 7-coil stator with 5 wires for two stroke engines - 3-pin plug , 2 loose wires
- 2 bolt holes, 103mm bolt hole spacing.
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Back Plate included
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010\". Specifications: Dimensions :
Interior diameter : 79 mm
Exterior diameter : 27 mm
Thickness : 13 mm
Length of wires stator to grommet : 79 mm
Length of wires grommet to plug : 200 mm
Length of pickup coil\'s wire to grommet : 100 mm
Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5
Wire to wire resistance :
Alternator : Red to White = 0.4 ohms \/-20%
Pickup : Pink to Black = 500 ohms \/-20%
Source : Black/Red to Black = 300 ohms \/-20%Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |
