Brand new aftermarket stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications:

Dimensions :
Interior diameter : 44 mm
Exterior diameter : 105 mm
Thickness : 16 mm
Length of wires stator to grommet : 132 mm
Length of wires grommet to plug : 1250 mm
Length of pickup coil\'s wire to grommet : 180 mm

Other specifications :
Number of wires : 11
Number of plugs : 9
Number of pins : 11

Wire to wire resistance :
Alternator : Yellow to Yellow/Black = 0.4 ohms \/-20%
Alternator : Yellow to Yellow/Red = 1.0 ohms \/-20%
Pickup : White/Red to Red = 115 ohms \/-20%
Source : Black/Red to Red = 225 ohms \/-20%

Warning:

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.