Brand new aftermarket stator- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions: Interior diameter : 41 mm Exterior diameter : 114 mm Thickness : 14 mmLength of wires stator to grommet : 170mm Length of wires grommet to plug : 130mm Length of pickup coil\'s wire to grommet : 110mm Other specifications:
Number of wires : 6 Number of plugs: 2 Number of terminals : 7 Wire to wire resistance: Alternator : Yellow to Yellow = 0.4 ohms\/-20% Pick up : White to White/Red = 200 ohms\/-20% Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |