Brand new high output stator- Direct replacement to your original unit
- Pick up pulsar coil included
- Connector included
- Opposite connector included
- Rubber grommet included
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions: Interior diameter: 30 mm Exterior diameter: 84 mm Thickness: 12 mm Length of wires stator to grommet: 180 mm Length of wires grommet to plug: 980 mm Length of pickup coil\'s wire to grommet: 95 mm Other specifications: Number of wires: 4 Number of plugs: 2 Number of pins: 4 Wire to wire resistance: Alternator: White to Yellow = 0.3ohms \/-20% Pickup: White to Red = 264ohms =\/-20% Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |