Brand new aftermarket stator- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Back Plate included
- All products shipped are tested
20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS. We have even included the opposite connector (main harness side) as we know these are often melted corroded defective and a major cause for repetitive electrical issues. All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions :
Interior diameter : 54 mm
Exterior diameter : 126 mm
Thickness : 33 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to alternator : 410 mm
Length of wires grommet to pick up coil : 615 mm
Length of pickup coil\'s wire to grommet : 90 mm Other specifications :
Number of wires :2
Number of plugs :4
Number of pins :7
Wire to wire resistance :
Alternator :Between yellow wires = 0.6 ohms \-20%
Pickup :Green to White = 196 ohms \-20%
Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |
