Brand new aftermarket stator- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions : Interior diameter : 28 mm Exterior diameter : 84 mm Thickness : 12 mm Length of wires stator to grommet : 82 mm Length of wires grommet to plug : 400 mm Length of pickup coil\'s wire to grommet : 40 mm Other specifications : Number of wires : 6 Number of plugs : 3 Number of pins : 6
Wire to wire resistance : Alternator : White To Yellow = 0.6 ohms \/-20% Pickup : = Green To Red = 100 ohms \/-20% Source : Red/White To Black/Red = 15 ohms \/-20% Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |